About us| Favorite| sitemap

Hello, welcome to the website of Dongguan Gaoshang Machinery Co., Ltd.!

东莞市高尚机械有限公司

东莞市高尚机械有限公司

中文英文 Tel:400-6556-156

support hotline:

400-0556-156

Dongguan Gaoshang Machinery Co., Ltd.

Mobile: 13925556156 (Mr. Yang)

Mobile: 18575381952 (Miss Xue)

Tel: 0769-86866158

Fax: 0769-85623986

E-mail: 13925556156@163.com

Address: Cha Nan Road, Chashan Town, Dongguan City, Guangdong Province

Small size air driver 15x15cm logo/marking heat press machine

  • Product Name:Small size air driver 15x15cm logo/marking heat press machine
    Release date:2018-04-03 15:02:04
    Introduction: Dongguan Gaoshang Machinery Co., Ltd. is a professional modern machinery and equipment enterprise integrating scientific research, production and sales into one Corporate technology cooperation. Product quality has reached the level of international standards
  • Tel:400-6556-156
  • Product Details

Model: GS-QDM-2

Main uses
The pneumatic double position stamping machine can transfer the color pattern of sublimation, solvent ink and ink to cotton, hemp, chemical fiber, nylon and other fabrics and ceramic products. It also can be used for heat treatment of hair burning and foaming printing, and the bonding of low temperature and low pressure lining with the fabric, such as clothing, shoes and hats, etc., and also for the production of small batch handkerchiefs.

The characteristics
Electronic digital display has constant temperature control and high accuracy, (+ 2 c).
The imported aluminum alloy is used for heating, and the heat conduction principle is adopted, which saves electricity, temperature is uniform and temperature coefficient is small.
Electronic digital time control, high accuracy and beautiful.
Pressure random adjustment


Technical parameters
Power: 2000-3500W
Voltage: 220V
Temperature range: 0-399 degrees centigrade
Time range: 0--999Sec
Hot stamping area: 38*38 40*60 60*80
 

Operation steps
 
1,connect the compressor connector, open the air pressure, adjust the pressure regulator 6 to (4pB-6pB), make the heating plate rise.
 
2, connect the compressor connector, open the barometric pressure, modulate the pressure gauge (4pB-6pB), and raise the heating plate.
 
3, power up, turn on the main switch, and the indicator will light up.
 
4, adjust the time and temperature required. (for details see the last page.)
 
5, after adjusting the temperature and time, wait for the machine to heat up.
6. After the temperature is finished, the thermometer will light a small green light.
 
7, the clothes are placed on the silica gel pad, then put on the hot drawing paper, (pay attention to the right and reverse side of the drawing paper) to push the table to the hot press position. 

9 start switch, put the articles flat, put the hot drawing paper, then put the high temperature cloth, press the start switch, the stamping start, the time reverse.

 
8, at the end, the buzzer rings. The heating plate is automatically raised and pulled out of the working table.
 
9. The perm. If the hot tear paper is cold, please wait 5-10 seconds to tear up the hot paper. If it is the hot tear hot paper, if the hot stamping is finished, please tear the ironing paper immediately.
 
10.after successful printing, you can turn the button 1 to the semi-automatic stop. After placing hot stamping objects, hot stamping will start automatically as long as the mobile handle 7 is above the hot stamping object. In case of emergency, you can press the button 6, stop immediately, and the emergency stop button can resume hot stamping after reset.
 
 
The temperature and time required for stamping are as follows
Cotton clothes: 180-220 degrees, 25 seconds
Polyester clothing: 180 degrees, 15 seconds
Pearlite: 180 degrees, 120--180 seconds
Metal pendant: 180 degrees, 60 seconds
Mouse pad: 180 degrees, 15 seconds
Porcelain: 200 degrees, 180 seconds
Key button: 180 degrees, 100 seconds
Ceramics: 180-220 degrees, 180 seconds
 
 

Product Display










 


400-6556-156

罗小姐

服务热线:400-6556-156